

DIVIDER
System of division or rejection in production lines for all types of packaging

DIVIDER
System Of Separation By Bands Or Belts - To ensure that the bottles reach the rejection point with a minimum step (GAP) according to the inspection system, the speed and the measurements of the containers, E2M offers a flexible system based on drums or belts driven by motors controlled by frequency inverters .
To ensure that the bottles reach the rejection point with a minimum step (GAP) according to the inspection system, the speed, and the measurements of the containers, E2M offers a flexible system based on drums or belts driven by motors controlled by frequency inverters.
The system accumulates bottles at the entrance and lets them pass at a constant pace and a guaranteed minimum distance.
The separator consists of 2 drums or belts covered with a non-corrosive liquid-resistant material ideal for humid environments.
DESCRIPTION
The packaging divider Divider allows the diversion or distribution of containers of a line in two adjacent exit lanes. The rejection system is based on the use of a set of segments, like fingers, that move the containers smoothly and alternatively between two adjacent lanes.
Features
-
Speeds greater than 120 m / min and even with a zero separation between containers (GAP = 0).
-
HMI user interface.
-
Automatic lubrication system
-
ETH connection with VPN remote access.
-
Protection with electrical safety.
-
Stainless steel tubes.
-
Control cabinet in satin polished stainless steel 450 (H) x 450 (W) x 300 (L) mm
-
400 W servomotor, with servo drive communicated by Modbus.
-
7 “HMI color industrial touch screen, with IP 65 protection.
-
USB connection and HDMI output
What Can Do A DIVIDER?
